# Signal Reset \<= '1' if Input A signal is constant for one second

**URL:** <https://forum.liquidinstruments.com/t/signal-reset-1-if-input-a-signal-is-constant-for-one-second/888>\
**Category:** Moku Cloud Compile\
**Created:** [January 25, 2024, 7:54pm UTC](https://forum.liquidinstruments.com/t/signal-reset-1-if-input-a-signal-is-constant-for-one-second/888 "2024-01-25T19:54:05Z")\
**Posts on this page:** 1\
**Showing post:** 7

<div class="post-metadata">

**Author:** ![roflo](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@roflo](https://forum.liquidinstruments.com/u/roflo)\
**Post date:** [January 31, 2024, 7:25pm UTC](https://forum.liquidinstruments.com/t/signal-reset-1-if-input-a-signal-is-constant-for-one-second/888/7 "2024-01-31T19:25:25Z")

</div>

Hi hanklong,

It is good to know.

But the problem I have remains. Maybe it is an understanding problem on my side when I run a Clk process.

1.) clk is the internal clock of the Moku Go box right?

1. If this is the case then the individual processes are run in MHz frequency or ?

2. so it should be possible to count the number of times in which the signal in Inputs 0 can be used as an If Else condition?

Best roflo

---

_[View the full topic](https://forum.liquidinstruments.com/t/signal-reset-1-if-input-a-signal-is-constant-for-one-second/888)._