# Moku:Pro : 'In' and 'Out' labels on case

**URL:** https://forum.liquidinstruments.com/t/moku-pro-in-and-out-labels-on-case/864
**Category:** New Features, Requests, and Feedback
**Created:** [December 8, 2023, 1:12pm UTC](https://forum.liquidinstruments.com/t/moku-pro-in-and-out-labels-on-case/864 "2023-12-08T13:12:14Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![dhwielens](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.liquidinstruments.com/dhwielens/32/248_2.png) [@dhwielens](https://forum.liquidinstruments.com/u/dhwielens)
#### Post date: [December 8, 2023, 1:12pm UTC](https://forum.liquidinstruments.com/t/moku-pro-in-and-out-labels-on-case/864/1 "2023-12-08T13:12:15Z")

</div>

Hi,

I noticed that the Moku:Pro does not have the labels ‘In’ and ‘Out’ to denote which four terminals are inputs/outputs, while the other Moku products do have these labels. While to experienced users this is no problem, it might be a bit confusing for new users. Would it be possible to add these labels in the printing step as well?

---

<div class="post-metadata">

### Author: ![hanklong](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.liquidinstruments.com/hanklong/32/288_2.png) [@hanklong](https://forum.liquidinstruments.com/u/hanklong)
#### Post date: [December 21, 2023, 11:15pm UTC](https://forum.liquidinstruments.com/t/moku-pro-in-and-out-labels-on-case/864/2 "2023-12-21T23:15:20Z")

</div>

Hi Daan,

I am sorry for the confusion!

Unfortunately, we don’t have the label on the Moku:Pro. However, we have Moku:Pro Quick Start Guide sent with every Moku:Pro which states the basic hardware layout of the unit. This is the link of the Moku:Pro Quick Start Guide.

> **[MokuPro-QuickStartGuide.pdf](https://download.liquidinstruments.com/documentation/guide/hardware/mokupro/MokuPro-QuickStartGuide.pdf?hsCtaTracking=cd3b115e-3bd8-41cb-8acc-d6236245cda4%7C798109d2-14ae-41c4-b702-94bb12e5d08c)**
>
> 242.80 KB

Hope it helps!

Best regards,  
Hank