# Is it possible to use 2 Analog inputs(InputA and InputB ) and the DOI port as In - and output (InputC/OutputC) )

**URL:** <https://forum.liquidinstruments.com/t/is-it-possible-to-use-2-analog-inputs-inputa-and-inputb-and-the-doi-port-as-in-and-output-inputc-outputc/895>\
**Category:** Moku Cloud Compile\
**Created:** [February 12, 2024, 1:14pm UTC](https://forum.liquidinstruments.com/t/is-it-possible-to-use-2-analog-inputs-inputa-and-inputb-and-the-doi-port-as-in-and-output-inputc-outputc/895 "2024-02-12T13:14:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![roflo](https://avatars.discourse-cdn.com/v4/letter/r/90ced4/32.png) [@roflo](https://forum.liquidinstruments.com/u/roflo)\
**Post date:** [February 12, 2024, 1:14pm UTC](https://forum.liquidinstruments.com/t/is-it-possible-to-use-2-analog-inputs-inputa-and-inputb-and-the-doi-port-as-in-and-output-inputc-outputc/895/1 "2024-02-12T13:14:01Z")

</div>

Hi,  
I need some basic advise to calibrate the cloud compile slot for a HDL code which should handle 2 Analog inputs and DOI inputs in parallel.  
The Device I use is the Moku:Go and out of the MCC documentation I think it must be possible.  
[https://compile.liquidinstruments.com/docs/io.html#clk-and-reset](https://compile.liquidinstruments.com/docs/io.html#clk-and-reset)

 ![Inputs_and_outputs](https://canada1.discourse-cdn.com/flex035/uploads/liquidinstruments/original/1X/8e320ab6e8e4589ef4adfc1ecbd7bad3cf31d13d.png)  
From my point of understanding I would manage this like the following screen shot:  
 ![DIO_config](https://canada1.discourse-cdn.com/flex035/uploads/liquidinstruments/original/1X/0028b6f7729a4d5970b43510af20fab750d142d0.png)  
but I’m not sure if It’s working in this way?

It would be really nice to discuss about this.

Best roflo