# Lab tutorials, exercises and use cases

**URL:** https://forum.liquidinstruments.com/c/projects-and-applications/lab-tutorials-use-cases/16.md

[Latest](https://forum.liquidinstruments.com/latest.md) · [Categories](https://forum.liquidinstruments.com/categories.md)

---

## [About the Lab tutorials, exercises and use cases category](https://forum.liquidinstruments.com/t/about-the-lab-tutorials-exercises-and-use-cases-category/59)

<div class="topic-metadata">

**Author:** [@PaulC](https://forum.liquidinstruments.com/u/PaulC)\
**Replies:** 0

</div>

Discussion of lab exercises, tutorials and use cases of Moku:Go

---

## [Butterworth filter : a lab example](https://forum.liquidinstruments.com/t/butterworth-filter-a-lab-example/67)

<div class="topic-metadata">

**Author:** [@PaulC](https://forum.liquidinstruments.com/u/PaulC)\
**Replies:** 0\
**Last updated:** [April 17, 2021, 12:20am UTC](https://forum.liquidinstruments.com/t/butterworth-filter-a-lab-example/67 "2021-04-17T00:20:38Z")

</div>

Op-amp based filters are a common lab experiment at the undergraduate level. In this application note, we describe how we used Moku:Go to understand the frequency response of Butterworth filter.

---

## [Triggered FRA measurements possible?](https://forum.liquidinstruments.com/t/triggered-fra-measurements-possible/454)

<div class="topic-metadata">

**Author:** [@PolMoku](https://forum.liquidinstruments.com/u/PolMoku)\
**Replies:** 2\
**Last updated:** [January 7, 2022, 10:35am UTC](https://forum.liquidinstruments.com/t/triggered-fra-measurements-possible/454 "2022-01-07T10:35:40Z")

</div>

Would like to see if Moku:Go can be used as autonomous instrument to measure FRA of a shuttle of liquid samples. When the sample has been pumped to the sensor we would like the pump controller to be able to send a trigge…

---

## [Using Moku:Go to power and test EVMs for your application](https://forum.liquidinstruments.com/t/using-moku-go-to-power-and-test-evms-for-your-application/410)

<div class="topic-metadata">

**Author:** [@Sam.Speece](https://forum.liquidinstruments.com/u/Sam.Speece)\
**Replies:** 0\
**Last updated:** [October 5, 2021, 6:57pm UTC](https://forum.liquidinstruments.com/t/using-moku-go-to-power-and-test-evms-for-your-application/410 "2021-10-05T18:57:25Z")

</div>

Moku:Go’s integrated test environment allows you to access Programmable Power Supplies and an Oscilloscope all from the same screen to make testing out an evaluation module (EVM) more convenient for you. With all the nec…